Tuesday 27 September 2022

28mm Japanese Bunker

 28mm Japanese Bunkers

So I was trying to use up some of the bamboo rods I had acquired from the pound shop (I had bought these to make a tower / look out post -see an earlier blog entry) and I though I will do some mini bunkers and walls for our Pacific game. 

See previous video and Pacific posts.

                              

28mm Japanese Bunker



First coats done but still needs some paint touch - up but getting there..

                       28mm Japanese Bunker


Making it - So out came my saw and I started cutting. I wanted just to experiment with a small low two man bunker (one with a small profile) and some palm tree like walls. 


So I cut the rods into sections. The walls had to be no bigger than than the palm trees we are using - but other than that anything goes...then hot glued them together. 


Below: the unpainted ones...


The bunker with an HMG sitting on sandbags (green stuff)  and two extra heads from my parts tray. and some plastic foliage..
28mm Japanese Bunker

28mm Japanese Bunker

I wanted the walls to look well weathered - so I added some ground foliage this will help melt it into our mat.
I wanted them to look rough, aged and uneven. But regular enough to butt together.


So the walls ended up four rods high with some shorter cuts on the ends (4 off). This meant the 28mm figure could use it as cover. They can be used in any format - in parallel or a single long line (with a bunker?).

Now the thing I was testing and unsure about was whether it would fall over easily and then might need a base of clear plastic - I did not want to raise it off the mat with foamboard or mdf. But to my amazement they actually stood up without an issue. We will test these out at our next Pacific outing. 

No base is required. So it will blend in nicely. You could even place gaps in it for gun ports.

These are really cheap to make and provide a second line or outpost surrounding perimeter for next to nothing.

Then I did some smaller spider hole like ones I had tried these before..
But as usual I got a little carried away and did 16 eek!

Step away from the hack-saw! LOL


But you get the idea...Japanese troops to be inserted!

ohh well better get some more rods then...



3 comments:

  1. Ths ar great....I did something quite similar a few years ago but for 15mm....lots of mg positions and bunkers were created using super cheap kebab skewers!

    ReplyDelete
  2. "These are great..." must be time I went to bed!

    ReplyDelete
  3. Thanks rross - yes these are cheap and effective for dug in positions to supplement your full body squads.

    ReplyDelete